Skip to the beginning of the images gallery

AccuSinter Fast Zirconia Sintering Furnace

As low as $8,900.00

In stock

Only %1 left

SKU

ACCU1000

Fast Zirconia Sintering

Increases zirconia production speeds & decreases production costs
Cost-efficient and environment-friendly
Compact design, requiring less equipment space
Consistent zirconia pigment color
Eliminate contamination and build-up

Heating Elements

MoSi2 (Molybdenum Disilicide).

Controlled Temperature Release

The sintering platform is released once the chamber is cooled to a pre-set temperature. This feature ensures that the sintered zirconia is cooled in a controlled manner and is not subject to sudden temperature changes during cooling. The pre-set platform release can be adjusted to specific laboratory needs.

Sintering Tray Cover

The use of the alumina sintering tray cover is a primary factor for preventing occasional zirconia discoloring that may otherwise occur due to the heating elements.

Maximum 3 Trays

Each round 95 mm diameter tray can hold an average of 25 single units. A maximum of 3 trays can be stacked up during one cycle time. The bottom support tray elevates the sintering trays to provide even heat and should have no zirconia units placed inside it.

Create Your Own Custom Graph in Addition to the Pre-set Parameters

Simply enter the temperature setting of your preferred zirconia brand, and the DuoTron Pro will create your graph automatically. You can make the heat up and cooling time shorter or longer depending on the nature of the case.

Description

AccuSinter has been designed and programmed with
a user-friendly layout in mind, and as a result of our quality control
system, AccuSinter has impeccable performance compared to other competitors.
AccuSinter has been designed with a smaller chamber size for better heat distribution control.

Other attributes include:
• Compact size provides a smaller footprint for valuable lab space: 75 lbs / 11¾”(W) x 15 ¼”(D) x 23 ¾”(H)
• Stainless steel construction with multiple internal fans & uniquely designed air holes to maintain a
low exterior temperature.
• High resolution 7” LCD monitor (touch screen).
• Fully programmable and capable of creating custom cycles for different material needs.
• Stackable, up to three sintering trays: three tray capacity allows an average of 75 units to sinter in
each cycle.
• Consistent zirconia color
• Eliminate contamination build-up
• USB port for program upgrades
• 1600°C max temperature | 25°C/min max ramp rate
• Increases zirconia production speeds while decreasing costs