Product added to cart
Scheftner Milling Disk Starbond Titanium 5
As low as $108.00
In stock
Only %1 left
SKU
136500
- Milling disc made from grade 5 “ELI” titanium alloy TiAl6V4.
- Excellent bonding with ceramics for titanium.
- Biocompatible. Extremely corrosion resistant.
- Particularly patient friendly due to low thermal conductivity.
- Perfect suitable for implant-supportedrestorations superstructures bars and abutments.
FDA Approved
Composition in percent by mass of Dental Milling Disc Scheftner Starbond Ti5: | ||
Ti | 89.40% | |
Al | 6.20% | |
V | 4% | |
N,C,H,Fe,O | <0.4% | |
Technical properties of Dental Milling Disc Scheftner Starbond Ti5: | ||
Proof stress (Rp 0.2) | 837MPa | |
Ultimate tensile strength | 921MPa | |
Elongation | 15% | |
Vickers hardness | 330HV5/30 | |
Density | 4.4g/cm³ | |
Melting point | 1650°C | |
CTE (20-600°C) | 10.3 x 10⁻⁶K⁻¹ | |
Type (DIN EN ISO 22674) | 4 | |
Sizes of Dental Milling Disc Scheftner Starbond Ti5: | ||
08mm x 98.3mm | with edge | Ref. 136508 |
10mm x 98.3mm | with edge | Ref. 136510 |
12mm x 98.3mm | with edge | Ref. 136512 |
13,5mm x 98.3mm | with edge | Ref. 136513 |
15mm x 98.3mm | with edge | Ref. 136515 |
16mm x 98.3mm | with edge | Ref. 136516 |
18mm x 98.3mm | with edge | Ref. 136518 |
25mm x 98.3mm | with edge | Ref. 136525 |
30mm x 98.3mm | with edge | Ref. 136530 |
Highlight 1 | Excellent metal-ceramic bonding with all commercially available veneering ceramics for titanium alloys |
---|---|
Highlight 2 | Very biocompatible |
Highlight 3 | Extremely corrosion resistant |
Highlight 4 | Very patient-friendly due to its low thermal conductivity |
Highlight 5 | Extremely suitable for implant-supported restorations, superstructures, bars, abutments, crowns and bridges |