Product added to cart
Cobalt Chrome MoguCera Scheftner Discs
As low as $188.00
In stock
Only %1 left
SKU
138112
MoguCera C Disc
CoCrMo milling disc with excellent properties for the manufacture of crowns, bridges, frameworks, telescopes, bars, attachments and implant supported superstructures. MoguCera C Disc is based on a non-precious ceramic alloy already used in the conventional casting technology. Free of nickel, beryllium, lead und cadmium. Type 4 pursuant to DIN EN ISO 22674 with a very wide range of indications.
Advantages for users:
- Medium hardness of 288 HV 10
- Excellent metal-ceramic Bonding
- Biocompatible
- Easy to work with and very to polish
- Laser weldable
- Suitable for dry and wet milling
Composition in percent by mass:
Co | 65% |
Cr | 28% |
Mo | 5% |
C,Si,Nb,Mn,Fe | <1% |
Technical properties:
Proof stress (Rp 0.2) | 413MPa |
Ultimate tensile strength | 597MPa |
Elongation | 12% |
Elastic modulus | 206GPa |
Vickers hardness | 288HV10 |
Density | 8.3g/cm³ |
CTE (20-500°C) | 14.5 x 10⁻⁶K⁻¹ |
CTE (20-600°C) | 14.8 x 10⁻⁶K⁻¹ |
Laser weldable | Yes |
Type (DIN EN ISO 22674) | 4 |
Sizes:
08mm x 98.3mm | with edge | Ref. 138108 |
10mm x 98.3mm | with edge | Ref. 138110 |
12mm x 98.3mm | with edge | Ref. 138112 |
13.5mm x 98.3mm | with edge | Ref. 138113 |
15mm x 98.3mm | with edge | Ref. 138115 |
16mm x 98.3mm | with edge | Ref. 138116 |
18mm x 98.3mm | with edge | Ref. 138118 |
20mm x 98.3mm | with edge | Ref. 138120 |
25mm x 98.3mm | with edge | Ref. 138125 |
30mm x 98.3mm | with edge | Ref. 138130 |
08mm x 99.5mm | without edge | Ref. 138008 |
10mm x 99.5mm | without edge | Ref. 138010 |
12mm x 99.5mm | without edge | Ref. 138012 |
14mm x 99.5mm | without edge | Ref. 138013 |
15mm x 99.5mm | without edge | Ref. 138015 |
16mm x 99.5mm | without edge | Ref. 138016 |
18mm x 99.5mm | without edge | Ref. 138018 |
20mm x 99.5mm | without edge | Ref. 138020 |
25mm x 99.5mm | without edge | Ref. 138025 |
30mm x 99.5mm | without edge | Ref. 138030 |